Rite Life Sensitometer 394 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
3
Applying Power
The sensitometer is shipped from the factory with the
battery installed and power switch in the “Off” (left)
position—slide switch to the “On” (right) position. The
battery switch for the 393 is located on the front of the
instrument. The battery switch for the 394 is located on
the bottom of the instrument.
Because there is no drain on the battery during non-use
times, the power switch can remain in the “On”
position. The only time that the power switch must be
turned “Off” is when the instrument is transported or
the battery replaced.
Your sensitometer is designed to operate from a “9
Volt” alkaline battery for approximately one year.
When the battery is low, the circuit will not allow any
exposures to occur. Should your unit become
inoperative, replace the battery first, refer to Section
Five. If this does not rectify the problem, refer the
instrument to X-Rite or an authorized service center for
proper servicing. There are no user serviceable
components in the sensitometer.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Comments to this Manuals

No comments